Zeitronix ECA-2 Ethanol Percentage Content Analyzer E85 / Fuel Temp CAN Bus

Description

Zeitronix Ethanol Content Analyzer ( ECA-2 ) CAN Bus
Important Note:
A flex fuel sensor is
not included
with purchase of this Ethanol Content Analyzer ECA-2. Zeitronix offers a flow through sensor and the ECA-2 is compatible with standard OEM sensors used in most GM vehicles with the flex fuel insignia or which run on E85 (different harness required for GM flex fuel sensors, GM style harness not included).
Two 0-5 V analog outputs: Ethanol % and Fuel Temperature for use with ECUs, data logging and engine management systems
Ethanol Percentage, 0-5 Volts, 0% to 100%
Fuel Temperature, 0-5 Volts, -40 to 125 °C (-40 to 257 °F)
Connecting harness to Zeitronix Flow Through Flex Fuel Sensor is included,
sensor is not included
Included connecting harness will not work with GM style flex fuel sensors
Optional real time E% Ethanol Content Gauge
not included, available separately
The ECA-2 is compatible with standard OEM sensors used in most GM vehicles with the flex fuel insignia or which run on E85
ECA-2 dimensions: 3" x 2" x 1" (76mm x 50mm x 25mm)
Made in the USA!
What's your ethanol percentage?
The ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle. For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower.
Why know your ethanol percentage?
E85 has the equivalent octane rating of 105 octane gasoline. Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.
Ethanol Content Analyzer
ECA-2 Analog Outputs:
Ethanol content and temperature analog outputs are available as part of the ECA-2. The flex fuel sensor does not provide these outputs. Zeitronix has created the ECA-2 to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.
Supports CAN Bus communication.
Supported CAN Bus Specifications:
User selectable CAN Bus Speed: 1Mbps, 500 Kbps, 250 Kbps, 125 Kbps
User selectable CAN Bus ID: Standard (11 bit) and Extended (29 bit)
User selectable CAN Bus address: Standard 0x0000 to 0x7FF Extended 0x0000 to 0x7FFF
User selectable CAN Bus update rate: 1ms (1000Hz) to 250ms (4 Hz)
120 ohm termination - None
CAN DATA: Data 0 : E % = 8 bit, Data 1 : Fuel Temperature (C) = 8 bit - 40, Data 7: FF Sensor Status, 0x00 Sensor OK, 0x01 Sensor fault
CAN Bus ID Standard (11 bit), CAN Bus ID (HEX) 0x00EC, CAN Bus Update Rate 250 ms (4 Hz), CAN Bus Speed 500 Kbps
Zeitronix serial cable (
available separately, not included
) is required for other than default set up
Ethanol content and temperature analog outputs are available as part of the ECA-2 CAN Bus.  The flex fuel sensor does not provide these outputs.  Zeitronix has created the ECA-2 CAN Bus to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.
Click here to shop my store!
Purchase Details:
eCheck payments wait to ship until the eCheck clears, per PayPal instructions
Sales tax is collected for most states, please review your total purchase amount before committing to buy
International buyers pay import duties / customs fees
My name is Chris and I sell on eBay using the golden rule: treat others as I'd want to be treated (and it's worked so far: look at my feedback since
1999
on eBay).  I'm happy to answer any questions. I want each transaction to go smoothly!