Tanabe Revel VLS OLED Wideband Air/Fuel Ratio Gauge w/ Bosch 4.9 LSU O2 02 UEGO

Description

Manufacturer:
Tanabe
Part Number:
1TR1AA005R
Condition:
New
Product Description:
The Revel VLS Wideband A/F Ratio Gauge utilizes the best in sensor technology with the included LSU 4.9 oxygen content and Lambda value sensor. While many aftermarket wideband gauges are still operating on the older, less accurate sensor, OE manufacturers and Revel VLS have made the switch to LSU 4.9, the new standard. Compatible with gasoline and E85.
*The Revel VLS Wideband A/F gauge is not daisy-chain compatible.
2 1/16 in. (52mm) diameter gauge
10.0:1 to 20.0:1 AFR reading
Bosch 4.9 LSU sensor
Digital OLED display
30 LED outer ring
Analog output wire harness included
Mounting kit included
BOSCH 4.9 LSU SENSOR
Included with the Revel VLS Wideband A/F Ratio gauge is the BOSCH 4.9 LSU Sensor for the most accurate readings. This sensor is longer lasting and is accurate to 0.1 AFR reading and does not require to be free-air calibrated upon initial setup* (however it will still need further recalibration based on altitude changes and general sensor wear in order to ensure accuracy). This is a major improvement over the previous LSU 4.2 sensor.
The kit also includes the weld-in bung that is required for the installation of the sensor.
OLED DISPLAY
Maximum comfort is attained by the use of an OLED (Organic Light Emitting Diode) numerical display. When compared to a traditional LCD display, the OLED display provides sharper contrast resulting in a deeper black for a crisp, clear images that is easier to read at a glance. The technology also allows for undistorted viewing angles approaching 170 degrees. The OLED display also does not require a backlight to be clearly visible at night, which gives the slim profile of the gauge — perfect for mounting in areas where space is an issue.
INCLUDED ITEMS
All Revel VLS gauges include the necessary hardware, sensors, and universal mounting pod and hood, as well as the installation instructions:
(1) Wideband Air/Fuel Ratio Gauge 2 1/16 in. (52mm)
(1) Power Harness
(1) Electronic Control Unit
(1) Gauge Signal Harness (Control Unit to Gauge)
(1) Analog Output Harness
(1) Oxygen Sensor and wiring
(1) Weld-In Oxygen Sensor Bung
(1) Bung Plug
(1) Mounting Pod
(1) Sun Shade (hood)
(1) 3M double sided tape
(2) Mounting Bracket Threaded Extension
(2) Washers
(2) Nuts
(1) Mounting Bracket
Additional Information:
None
Guaranteed Fitments:
Universal
Payment:
Click the Buy it Now button at the top of this listing to immediately proceed with our checkout and payment process. The Sparktec Motorsports eBay Store requires immediate payment with PayPal.
Sales Tax:
We are required to collect 10% sales tax on the product and shipping amount for orders shipping to California.
Shipping:
ALL PRODUCTS IN THE SPARKTEC MOTORSPORTS EBAY STORE IS IN STOCK AND READY TO SHIP IMMEDIATELY! Order ships FREE via USPS Priority Mail to any address inside the 48-state contiguous United States. Any address outside of the 48-state contiguous United States or Canada, please contact Sparktec Motorsports for a shipping quote.
Customer Service:
To contact us with questions/comments, please email us using the "Ask a question" link at the top of the page. Most emails are answered within 24 hours, including weekends and holidays.
Return Policy:
Sparktec Motorsports' eBay Store allows returns of any item, in new and unused condition with original packaging, within 30-days of receiving the item for a refund or exchange. Absolutely NO returns or exchanges allowed on products that have been used, installed, mounted, or missing components. All non-defective returns are subject to a 20% restocking fee. All returns must be accompanied by a Return Merchandise Authorization (RMA) number which can be obtained by contacting us. Any products returned without a Return Merchandise Authorization (RMA) number will be refused. Please contact us in the event you're not satisfied with your purchase as we are more than happy to work with you to ensure a positive experience.